4″ DC Plastic Impeller Solar Pump
DCBomba sumergible4″

4″ DC Plastic Impeller Solar Pump

210 mAltura máx.
30 m³/hCaudal máx.
300–3000 WRango de potencia
2 yrGarantía
2-yr Garantía70+ países15+ años de experiencia✓ CE · RoHS · ISO

Engineering note. Maximum head and maximum flow are curve endpoints, not one simultaneous duty point. Final selection is verified against your total head, required flow and solar resource.

  • Permanent-magnet brushless motor + intelligent MPPT (auto start/stop, soft-start)
  • Controller LED display: voltage / current / power / speed (RPM) / error code
  • Oil cooling
  • Full protection: over/under-voltage, overload, over-current, dry-run, reverse, over-temp
  • Runs directly off PV modules — no batteries required
  • Engineering-plastic impeller + SUS304 shaft & sleeve — economy clean-water build

Especificaciones

#ModelVoltaje (V)Potencia (W)Corriente (A)Caudal máx. (m³/h)Altura máx. (m)SalidaØ (mm)Longitud (mm)Peso (kg)Cable recomendado (mm²)FV recomendado
14PSC3.0-30-24-3002430012.53301.25"987708.941 × 400 Wp
24PSC6.0-30-48-400484008.36301.5"987909.52.52 × 300 Wp
34PSC3.5-50-48-400484008.33.5501.25"987909.52.52 × 300 Wp
44PSC9.0-30-72-600726008.39302"9884010.82.53 × 300 Wp
54PSC6.0-40-72-600726008.36401.5"9884010.82.53 × 300 Wp
64PSC3.5-70-72-600726008.33.5701.25"9884010.82.53 × 300 Wp
74PSC13.0-30-96-750967507.813302"9887011.72.53 × 300 Wp
84PSC9.0-35-96-750967507.89352"9887011.72.53 × 300 Wp
94PSC6.5-55-96-750967507.86.5551.5"9887011.72.53 × 300 Wp
104PSC3.5-90-96-750967507.83.5901.25"9887011.72.53 × 300 Wp
114PSC14.0-45-144-110014411007.614452"9895513.92.56 × 300 Wp
124PSC9.0-60-144-110014411007.69602"9895513.92.56 × 300 Wp
134PSC6.5-85-144-110014411007.66.5851.5"9895513.92.56 × 300 Wp
144PSC3.5-120-144-110014411007.63.51201.25"9895513.92.56 × 300 Wp
154PSC20.0-45-192-150019215007.820452"98104516.42.58 × 300 Wp
164PSC14.5-70-192-150019215007.814.5702"98104516.42.58 × 300 Wp
174PSC10.0-90-192-150019215007.810902"98104516.42.58 × 300 Wp
184PSC7.0-110-192-150019215007.871101.5"98104516.42.58 × 300 Wp
194PSC4.5-130-192-150019215007.84.51301.25"98104516.42.58 × 300 Wp
204PSC30.0-35-280-220028022007.930352"98120520.92.510 × 300 Wp
214PSC20.0-65-280-220028022007.920652"98120520.92.510 × 300 Wp
224PSC14.5-100-280-220028022007.914.51002"98120520.92.510 × 300 Wp
234PSC10.0-130-280-220028022007.9101302"98120520.92.510 × 300 Wp
244PSC7.5-150-280-220028022007.97.51501.5"98120520.92.510 × 300 Wp
254PSC4.5-190-280-220028022007.94.51901.25"98120520.92.510 × 300 Wp
264PSC30.0-50-385-300038530007.830502"98139025.92.513 × 300 Wp
274PSC20.0-75-385-300038530007.820752"98139025.92.513 × 300 Wp
284PSC14.5-120-385-300038530007.814.51202"98139025.92.513 × 300 Wp
294PSC10.0-170-385-300038530007.8101702"98139025.92.513 × 300 Wp
304PSC7.5-210-385-300038530007.87.52101.5"98139025.92.513 × 300 Wp

Motor & Accionamiento

MotorPermanent-magnet DC brushless (PMSM)
AccionamientoSensorless FOC, pure sine-wave output
Seguimiento MPPT>99%
Clase de aislamientoF (155 °C)
ServicioS1 (continuous)
Protección IPIP68 (submersible motor) / IP66
Inmersión máx.150 m
Garantía2

Controlador & Protecciones

ControladorSensorless FOC sine-wave vector drive + MPPT (>99%), LED display
PantallaVoltage, Current, Power, Speed (RPM), Speed adjustment, Error code
Tamaño del controlador360 × 260 × 140 mm
Protecciones
OverloadOver-currentUnder-loadUnder-voltageReverse-connectionOver-temperature (thermal)Dry-run / low-waterSoft-start
Monitoreo remoto (opcional): Optional 4G/GSM or Wi-Fi monitoring module — remote flow, water level, energy and fault alerts with OTA updates (add-on; the standard controller uses a local LED display).

Condiciones de operación

Temperatura del agua0–40 °C
Contenido de arena≤ 0.05 % (≤ 500 g/m³)
Rango de pH5–9
Temperatura ambiente-15 to 70 °C
Pozo mín.100 mm

Materiales

  • Standard (economy)SUS304 sleeve + engineering-plastic impeller & diffuser + SUS304 shaft (Best price for clean-water irrigation / domestic supply)
  • Corrosion (option)SUS316 sleeve + plastic impeller (plastic is inherently corrosion-proof)
  • Sandy (option)SUS304 impeller upgrade (plastic wears faster in sand)

Componentes premium

  • 100% copper motor windings
  • Class F (155 °C) insulation system
  • NSK-grade sealed ball bearings
  • SUS304 shaft + engineering-plastic impellers
  • Silicon-carbide (SiC) mechanical seal
  • Oil-cooled motor
  • PMSM + sensorless FOC sine-wave controller, MPPT >99%

Cable recomendado

PV-to-controller & motor cable 2.5–4 mm² by model (copper, sized for a ~50 m run; step up one size per additional ~50 m of drop).

Per-model cable cross-section is listed in the specification table above (mm² column).

Certificaciones

RoHSCBTUVSGSISO 9001ISO 14001
Normas
IEC 62253 (PV pumping systems)IEC 60034 (rotating machines)IEC 60529 (enclosure / IP)

Bomba sumergible